SIGMA 3D

Two component, solvent free, high transparent clear epoxy for
interior 3D floors
PRINCIPAL CHARACTERISTICS
– excellent resistance to mechanical stress and impact
– excellent intercoat adhesion on the 3D picture film
– suitable for medium traffic conditions
– self leveling properties
– excellent water and chemical resistance
– excellent abrasion resistance
– easy to clean
COLOUR AND GLOSS
clear – high gloss

Product Details
SKU: 742 Categories: , Tags: ,

Basic Data At 20 °c

( For mixed product )
Mass density: approx. 1.1 g/cm3
Solids content: approx. 100% by volume
Recommended dry film thickness: 1 mm
Theoretical spreading rate: 1 m2/ltr for 1mm,
over the recommended prepared 3D floors
Touch dry after: approx. 5 hours
Overcoating interval: min. 24 hours* max. 7 days*
Full cure after: 7 days*
Shelf life (cool,dry place): 12 months

Previous coating (Sigma Floorguard Primer and Sigma Floorgurad Filler ) must be dry and free from any contamination
– 3D picture should be pasted well, clean and free from any dust
– substrate and ambient temperature should be minimum 10 oC during application and curing
– relative humidity should not exceed 85% during application and curing
– substrate temperature should be above 10 °C and at least 3 °C above the dew point during application and curing

Mixing ratio: base : hardener by volume: 65 : 35
by wright: 67 : 33
– materials temperature should be minimum 10oC
– mix base with a variable speed mechanical mixer
– add hardener and mix with mechanical mixer until homogeneous.
– mixer speed should not exceed 800 rpm to avoid air entrapment
Induction time at 20 °C: none
Pot life at 20 °C: 35 min*

Method Of Application

Tools
trowel
Recommended thinner: no thinner to be added
application by trowel
– pour the mixed product on to a suitably prepared 3D floor
– spread evenly by trowel followed by rolling with a spiked roller to release the air.
Cleaning solvent: Sigma thinner 90-53

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA 3D”

Your email address will not be published. Required fields are marked *

About SIGMA 3D


Two component, solvent free, high transparent clear epoxy for
interior 3D floors


  • Excellent intercoat adhesion on the 3D picture film

  • Suitable for medium traffic conditions

  • Self leveling properties