SIGMA WATER REPELLENT

Clear water repellent\impregnator for stone and other cement
based building materials
PRINCIPAL CHARACTERISTICS
– imparts water repellent properties to all stone like construction materials, to avoid rainwater penetration
– improves the moisture resistance of base materials
– prevents damage from soiling, fungus, algae and mould growth
– does not change the colour of construction materials
– an absorption preventing agent for cellular concrete and bricks, on which a dispersion wallpaint or texture may be applied
COLOUR AND GLOSS
clear

Product Details
SKU: 801 Category: Tags: ,

Basic Data At 20 °c

Mass density: approx. 0.8g/cm3
Theoretical spreading rate: approx. 12 m2/ltr
depending on the nature and condition of the substrate and the application method employed
Overcoating interval: min. 24 hours max. 14 days
Shelf life (cool, dry place): 24 months

Surface must be dry and free from unreacted alkali; all impurities
which may restrict good penetration of the product must be removed

One generously applied layer will normally be sufficient

Method Of Application

BRUSH
– apply the product in horizontal section; start at the bottom and continue application upwards; apply the product generously and in such a way that the liquid runs down over the previously treated part
Recommended thinner: no thinner to be added
SPRAY GUN
– this method gives lower loss of material and easier application; use simple low pressure equipment (e.g. a gardeners or agricultural spray pump)
Recommended thinner: no thinner to be added

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA WATER REPELLENT”

Your email address will not be published. Required fields are marked *

About SIGMA WATER REPELLENT


Clear water repellent\impregnator for stone and other cement