0748 – SIGMACRYL PURE SEMI GLOSS ABF

High quality water based decorative and protective finish based on
100% pure acrylic silicone resins with special anti-fungi and
anti-bacterial additive providing a highly durable finish
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– excellent wash and scrub resistance
– excellent adhesion properties
– unsaponifiable
– inhibits the growth of fungi and mould
– eliminates harmful microorganisms
– anti-carbonation properties
– very good colour retention properties
– moisture vapour permeable
– weather resistance
– very good crack bridging
– good flow and leveling properties
– low flame spread properties
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigma Standard Colour Selection – semi gloss

Product Details
SKU: 748 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.14g/cm3
Solids content
approx. 39% ± 2% by volume depending on colours
Recommended dry film
25 – 30μm
Theoretical
approx. 15.6 m2/ltr @ 25μm / 13 m2/ltr @ 30μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 1 hour
Overcoating interval
min. 4 hours
max. no limitation
Shelf life (cool dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum and gypsum board
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed prior to application of finishing coats
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal) *
– 0896 Sigma Concrete Filler (external)
*alternate primer 0805, alternate filler 0864
Recommended finish
– applied in two coats @ 30μm dft per coat

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “0748 – SIGMACRYL PURE SEMI GLOSS ABF”

Your email address will not be published. Required fields are marked *

About 0748 - SIGMACRYL PURE SEMI GLOSS ABF


High quality water based decorative and protective finish based on
100% pure acrylic


  • Inhibits the growth of fungi and mould

  • Eliminates harmful microorganisms

  • Excellent wash and scrub resistance