SIGMASCAN GLUE

Adhesive based on a modified polyvinyl acetate copolymer developed
to give optimal adhesion between Sigmascan and the substrate
PRINCIPAL CHARACTERISTICS
– for interior use
– very good adhesion
– flexible
– almost odourless
– easy to apply
– developed for use with Sigmascan
COLOUR AND GLOSS
milky-white

Product Details
SKU: 881 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.0g/cm3
Solids content
approx. 18% by volume
Consumption
approx. 400g/m2
depending on the nature and condition of the substrate and the
application method employed
Shelf life (cool,dry place)
24 months

– applied to a range of new or previously smooth painted cement type walls or ceilings e.g., concrete, gypsum board, plaster and cement
– moisture content, at the time of application, must be below 5%.
– alkaline surfaces must be flushed with sweet water until neutral
– all substrates should be free from under-bound paint layers
– free from laitance, dirt and other surface contaminants
– all new surfaces must be primed with the Sigma Primer appropriate
to the substrate condition .0805, 0852 or 0804
– all substrate imperfections, must be repaired with the appropriate K46Sigma Filler: 0896, 0803 or 0864
for substrates already painted
– remove all unsound and loosely adhering paint layers
– good intact paint layers must be cleaned with a 3% solution of
ammonia in water
– glossy paint layers must be abraded flat

A glue with sufficient flexibility and penetration to give optimal
adhesion between 0880 Sigmascan glass fibre fabric and almost
any primed cement based building material
– for application technique see data sheet for 0880 Sigmascan

Method Of Application

ROLLER/BRUSH
short haired hard roller or broad flat brush
Recommended thinner
sweet water
Volume of thinner
0 – 5%
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMASCAN GLUE”

Your email address will not be published. Required fields are marked *

About SIGMASCAN GLUE


Adhesive for Sigma Scan


  • Very good adhesion

  • Flexible

  • Developed for use with Sigmascan