High quality roller applied textured finish based on a copolymer dispersion filled with ground natural stone
الخواص الرئيسـية
– for exterior use
- غير قابل للتصبن
- خصائص جيدة للاحتفاظ بالألوان
- مُنفذ لبخار الماء
- مقاومة جيدة لعوامل الطقس
- خصائص التصاق جيدة
– can be used to create a variety of texture patterns
– low flame spread
– almost odourless
- سهل الاستخدام
اللون واللمعة
off white (other shades upon request) – flat
Mass density
approx. 1.8 g/cm3
Solids content
approx. 74 % by weight depending on colours
Theoretical
approx. 1.5 – 1.8 kg/m2
spreading rate
depending on the nature and condition of the substrate, the
weight applied and method of application.
Touch dry after
approx. 3 hours depending on the thickness
Overcoating interval
min. 24 hours
max. no limitation
Shelf life (cool,dry place)
12 months
Primed substrates
– dry and clean primed concrete, cement render and plaster
– dirt, dust and other contamination must be removed
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0896 Sigma Concrete Filler
Recommended finish
– from the range of Sigma waterborne exterior finishes
EQUIPMENT
sponge type texture roller or hopper gun
Recommended thinner
sweet water
Volume of thinner
5 – 10%
CLEANING SOLVENT
sweet water
Complies with VOC specifications such as LEED etc.
Reviews
There are no reviews yet.