lime free filler, surface leveler based on acrylic copolymer
waterbased resins developed for filling/smoothing of internal cement
based building materials and boards
– for interior use
– good filling smoothing and leveling properties
– unsaponifiable
– smooth surface produced
– easy to abrade
– good adhesion to primed substrates
– good cohesive strength
– emulsion finishes may be applied direct
– may be applied up to 1mm per coat
– multiple coats may be applied
– conforms to environmental specifications
off-white – flat

Product Details
SKU: 864 Category: Tags: ,

Basic Data At 20 °c

Mass density: approx. 1.8g/cm³
Solids content: approx. 74% ± 2% by weight
56% ± 2% by volume
Recommended dry film: 200μm – 1mm
Theoretical spreading rate:: approx. 0.5 – 1.0 kg/m2 @ 1mm approx. 2.8 m2/ litre @ 200μm
depending on the nature and condition of the substrate and the application method employed
Touch dry after: approx. 2 hours
Overcoating interval: min. 12 hours
max. no limitations
Shelf life (cool, dry place): 12 months

New primed substrates:
– dry and free from mortar splashes
– all surface contamination and dust must be removed
– cracks should be raked out before filling
previously painted (maintenance)

– remove all contamination, loose and flaking paint from the surface
– when used for patching work, spot prime all bare areas
– cracks should be raked out and primed before filling

Recommended Primer
– 0805 Sigma Masonry Primer
– 0852 Sigma Acrylic Primer Sealer
Recommended finish types
– Sigma smooth waterborne type finishes

Method Of Application

stainless steel filling knife, trowel or Swedish knife

Recommended thinner:
sweet water

Volume of thinner:
max. 3%


Complies with VOC specifications such as LEED etc.


There are no reviews yet.

Be the first to review “AQUAFILL WALLFILLER FINE”

Your email address will not be published. Required fields are marked *


Quality interior filler/skim coat for concrete, cement based building and boards

  • Good filling smoothing and leveling properties

  • Easy to abrade

  • Good adhesion to primed substrates