ECOLUX GLOSS

Finish coating based on alkyd resins, used to provide a gloss finish on multiple substrate types.
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– good colour retention properties
– good covering and hiding capacity
– suitable for primed wood and steel
– good weather resistance
– washable with scrub resistance
– good flow
– easy to clean
– easy to apply
COLOUR AND GLOSS
available in a limited range of light colours from the Sigma
Standard Colour Selection – gloss

Product Details
SKU: 861 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.05g/cm3
Solids content
approx. 31% by volume
Recommended
dry film thickness
35 μm
Theoretical
approx. 9 m2/ltr (34 m2/usg) for 35 μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 2 hours
Overcoating interval
min. 16 hours
max. no limitation
Shelf life (cool,dry place)
24 months

New primed/undercoated substrates
– dry and clean primed concrete, cement render, plaster, gypsum
and gypsum board, timber and metal.
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– bare and repaired areas should be spot primed prior to application

Recommended primers
– from the range of Sigma Primers appropriate to the substrate type
Recommended buildcoat
– 0811 Sigmacolor Undercoat
Recommended finish
– applied in two coats at 35μm dft per coat

Method Of Application

AIRLESS SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
AIR SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
5 – 10%
BRUSH AND ROLLER
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
CLEANING SOLVENT
20-05 (flashpoint 38 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “ECOLUX GLOSS”

Your email address will not be published. Required fields are marked *

About ECOLUX GLOSS


Finish coating based on alkyd