SIGMA FLOORGUARD FLOORING

Three component, high performance solvent free, self leveling epoxy
floor coating, as intermediate or final coat for Sigma Floorguard
system.
PRINCIPAL CHARACTERISTICS
– excellent resistance to mechanical stress and impact
– suitable for medium to heavy traffic conditions
– excellent abrasion resistance
– anti-skid aggregates can be added
– excellent water and chemical resistance
– excellent flow and leveling
– can be applied at varying thickness
– easy to clean
COLOUR AND GLOSS
limited attractive colors, see Sigma Floorguard color reference – gloss

Product Details
SKU: 674 Category: Tags: ,

Basic Data At 20 °c

( For mixed product )
Mass density: approx. 1.69 g/cm3
Solids content: approx. 100% by volume
Recommended dry film thickness: 1mm – 4mm
Theoretical spreading rate Approx 1 m2/ltr for 1mm, 0.5 m2/ltr for 2mm, depending on the nature, roughness and condition of the substrate and the application method employed
Touch dry after: approx. 7 hours
Overcoating interval: min. 24 hours* max. 7 days*
Full cure after: 7 days*
Shelf life (cool,dry place): 12 months

– Previous coating (Sigma Floorguard Primer) must be dry and free from any contamination
– substrate and ambient temperature should be minimum 10 oC during application and curing
– relative humidity should not exceed 85% during application and curing
– substrate temperature should be above 10 °C and at least 3 °C above the dew point during application and curing

Mixing ratio: base : hardener : filler: by volume: 61 : 20 : 19
– materials temperature should be minimum 10oC
– mix base with a variable speed mechanical mixer thoroughly
– add hardener and mix with a variable speed mechanical mixer until homogenous.
– add the filler while stirring and stir thoroughly for 2 minutes until it is homogeneous.
– mixer speed should not exceed 800 rpm to avoid air entrapment
Induction time at 20 °C: none
Potlife at 20 °C: 40 min*

Method Of Application

Tools
spiked roller, trowel and Swedish knife
Recommended thinner: no thinner to be added
for application pour an appropriate amount of the mixture on the suitably prepared subfloor and spread it evenly by trowel or Swedish knife use a spiked roller for avoiding air entrapment.
Note:
maximum permissible slope is 5 mm/m special work methods are necessary when this slope is exceeded.
for slopping areas/ramps please consult Sigma Technical Support
Cleaning solvent: Sigma thinner 90-53

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA FLOORGUARD FLOORING”

Your email address will not be published. Required fields are marked *

About SIGMA FLOORGUARD FLOORING


Three component, high performance solvent free, self leveling epoxy floor coating.


  • Excellent resistance to mechanical stress and impact

  • Suitable for medium to heavy traffic conditions

  • Excellent abrasion resistance