SIGMA HI-MARK TRAFFIC PAINT

Lead free road and pavement marking paint based on a blend of
modified alkyds and chlorinated rubber
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– unsaponifiable
– good adhesion to both concrete and asphalt
– excellent abrasion resistance
– excellent hiding power
– good resistance against water and oil
– good light reflection properties
– very quick drying
– easy to apply
COLOUR AND GLOSS
white, yellow and black – flat

Product Details
SKU: 892 Category: Tags: ,

Basic Data At 20 °c

Mass density: approx. 1.4 ± 0.2g/cm³
Solids content: approx. 40 – 42% by volume
Recommended dry film thickness: 100 μm
Theoretical spreading rate: approx. 4.2 m²/ltr (16 m²/usg) for 100 μm
depending on the colour, nature and condition of the substrate and the application method employed
Touch dry after: approx. 10 minutes
Shelf life (cool, dry place): 12 months

Concrete must be dry maximum 4% moisture content and
– free from laitance dirt, grease, and other surface contamination
– asphalt must have aged and cured for a minimum of 6 months to avoid the possibility of bleeding through the applied coating

To be applied in a single coat for marking lines and
patterns on concrete and asphalt surfaces

Method Of Application

AIR SPRAY
Recommended thinner: 21-04 (flashpoint 4 °C)
Volume of thinner: 5 – 10%
BRUSH AND ROLLER
Recommended thinner: no thinner to be added
Volume of thinner: roller and brush application is not recommended for asphalt surfaces
CLEANING SOLVENT: 21-04 (flashpoint 4 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA HI-MARK TRAFFIC PAINT”

Your email address will not be published. Required fields are marked *

About SIGMA HI-MARK TRAFFIC PAINT


Lead free road and pavement marking paint


  • Good adhesion to both concrete and asphalt

  • Excellent abrasion resistance

  • Good resistance against water and oil