SIGMA PROFILE EXTRA FINE

Water based acrylic copolymer structured texture finish filled with
ground natural stone, it can be applied by different techniques to
produce a variety of texture designs.
PRINCIPAL
– designed for exterior use, can be used internal
CHARACTERISTICS
– unsaponifiable
– moisture vapour permeable
– good weather resistance
– good colour retention properties
– can be used to create a variety of texture patterns
– good adhesive and cohesive properties
– good impact resistance
– flexibility properties
– masks substrate imperfections
– almost odourless
– easy to apply
– extended open time
COLOUR AND GLOSS
selected range of Sigma Profile Extra Fine colour card
(others on request) – flat

Product Details
SKU: 837 Category: Tags: ,

Basic Data At 20 °c

Mass density approx. 1.82 g/cm3
Solids content
approx. 77% by weight depending on colours
Theoretical
Approx. 1.5 – 1.7 kg/m2
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 6 hours depending on the thickness
Overcoating interval
min. 24 hours
max. no limitation
Shelf life (cool,dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render and plaster
– all dirt and other surface contamination must be removed
– a further application of 0842 will enhance the protective properties due to the granular structure formed by trowel application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0896 Sigma Concrete Filler “if required”
Recommended finish
– from the range of Sigma waterborne or solvented finishes if required
Notes
– on very smooth concrete apply as a primer 1 coat of
0831 Sigmaputz Extra Fine (diluted 15 – 20%)
– when overcoating with solvented products a minimum
of 16 hours drying time should be allowed
– as a self coloured waterborne finish and to reach optimal hiding one coat of 0842 Sigmacryl Flat ( 10 – 15% sweet water) in the same colour as the texture, can be applied

Method Of Application

TOOLS
– stainless steel trowel for application
– plastic trowel for structuring
Recommended thinner
sweet water
Volume of thinner
max. 3%
TROWEL APPLICATION
– apply using the stainless steel trowel in one thick coat
the grains of the material determine the thickness of the coat.
As soon as an area of 2 – 4 m2 has been applied, structure the
material using the plastic trowel, roughened before use
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA PROFILE EXTRA FINE”

Your email address will not be published. Required fields are marked *

About SIGMA PROFILE EXTRA FINE


Water based structured texture finish filled withground natural stone


  • Good adhesive and cohesive properties

  • Good impact resistance

  • Flexibility properties

  • Masks substrate imperfections