Quality trowel application structured finish based on a copolymer
dispersion filled with ground natural stone
– designed for exterior use, can be used internal
– unsaponifiable
– good colour retention properties
– water vapour permeable
– good weather resistance
– good adhesion properties
– can be used to create a variety of texture patterns
– outstanding impact resistance
– hides small substrate imperfections
– almost odourless
– easy to apply
– conforms to environmental specifications
selected range of 22 colors see Sigma Profile Medium color card (others on request) – flat

Product Details
SKU: 963 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.86 g/cm3
Solids content
approx. 83±2% by weight depending on colours
approx. 3 – 3.5 kg/m2
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 6 hours depending on the thickness
Overcoating interval
min. 24 hours
max. no limitation
Shelf life (cool, dry place)
12 months

New substrates
– dry and clean primed concrete, cement render and plaster
– all dirt and other surface contamination must be removed
– a further application of 0842 will enhance the protective properties due to the granular structure formed by trowel application.

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal)
– 0896 Sigma Concrete Filler (external)
Recommended finish
– from the range of Sigma waterborne and solvented finishes if required
– on very smooth concrete apply as a primer 1 coat of
0831 Sigmaputz Extra Fine (diluted 15 – 20%)
– when overcoating with solvented products a minimum
of 16 hours drying time should be allowed
– as a self coloured waterborne finish and to reach optimal hiding
one coat of 0842 Sigmacryl Flat (thinned with 10 – 15% sweet
water ) in the same colour as the texture, can be applied

Method Of Application

– stainless steel trowel for application
– plastic trowel for structuring
Recommended thinner
sweet water
Volume of thinner
max. 3%
– apply using the stainless steel trowel in one thick coat
the grains of the material determine the thickness of the coat.
As soon as an area of 2 – 4 m2 has been applied, structure the
material using the plastic trowel, which has to be roughened
before use
sweet water


Complies with VOC specifications such as LEED etc.


There are no reviews yet.

Be the first to review “SIGMA PROFILE MEDUIM”

Your email address will not be published. Required fields are marked *


Quality trowel application structured finish

  • Good weather resistance

  • Good adhesion properties

  • Can be used to create a variety of texture patterns