SIGMA PU LACQUER GLOSS

High quality clear lacquer based on urethane-alkyd resins for
hardwood softwood and composite timbers
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– very good weather resistance
– very good abrasion and scratch resistance
– good flow properties
– quick drying
– easy to clean, repair and maintain
– easy to apply
COLOUR AND GLOSS: clear – semi gloss

Product Details
SKU: 825 Category: Tags: ,

Basic Data At 20 °c

Mass density: approx. 0.92g/cm3
Solids content: approx. 42% ±2%by volume
Recommended dry film thickness: 30 μm
Theoretical spreading rate: approx. 14 m2/ltr (52 m2/usg) for 30 μm depending on the nature and condition of the substrate
and the application method employed
Touch dry after: approx. 2 hour
Overcoating interval: min. 8 hours, max. no limitation
Shelf life (cool,dry place): 24 months

Substrate must be dry and free from any contamination
– moisture content must not be higher than 17%

Can be used in a three coat system and can also be applied on top
of 0821 Rustikal Wood Stain (see data sheet for 0821)
– first coat must be diluted with 15% thinner 21-06 and the
following coats by a maximum of 10% thinner 21-07

Method Of Application

AIR SPRAY
seek advice from Sigma Decorative Technical Support
BRUSH
Recommended thinner
see system specification
CLEANING SOLVENT
21-06 (flashpoint 26 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA PU LACQUER GLOSS”

Your email address will not be published. Required fields are marked *

About SIGMA PU LACQUER GLOSS


High quality clear semi gloss lacquer based on urethane-alkyd


  • Very good weather resistance

  • Very good abrasion and scratch resistance

  • Quick drying