SIGMA PVA WALLFILLER

DESCRIPTION

High quality lime free repair filler/skim coat based on an alkali resistant polyvinyl acetate binder for concrete, cement, renders and gypsum, gypsum board.

PRINCIPAL CHARACTERISTICS
– for interior use
– excellent filling smoothing and leveling properties
– unsaponifiable
– very smooth surface produced
– very good adhesion to primed substrates
– high cohesive strength
– suitable for over-coating with alkyd paints
– emulsion finishes may be applied direct
– may be applied up to 1mm per coat
– multiple coats may be applied
– conforms to Environmental Specifications

COLOUR AND GLOSS
off-white – flat

Product Details
SKU: 803 Category: Tags: ,

Basic Data At 20 °c

Mass density: approx. 1.8g/cm3
Solids content: approx. 73% ± 2% by weight approx. 56% ± 2% by volume
Recommended dry film: 200μm – 1mm
Theoretical spreading rate: approx. 0.5 – 1.0 kg/m2 @ 1mm approx. 2.8 m2/ litre @ 200μm depending on the nature and condition of the substrate and the application method employed
Touch dry after: approx. 2 hours
Overcoating interval: min. 12 hours, max. no limitations
Shelf life (cool, dry place): 12 months
Flashpoint: above 65 °C

New primed substrates:
– dry and free from mortar splashes
– all surface contamination and dust must be removed
– cracks should be raked out before filling

Previously painted (maintenance):
– remove all contamination, loose and flaking paint from the surface
– when used for patching work, spot prime all bare areas
– cracks should be raked out and primed before filling.

Recommended primer:
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer for gypsum and gypsum board

Recommended finish types:
– Sigma waterborne smooth, textured and alkyd type finishes

Method Of Application

Tools:
stainless steel filling knife, trowel or Swedish knife

Recommended thinner:
sweet water

Volume of thinner:
max. 3%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA PVA WALLFILLER”

Your email address will not be published. Required fields are marked *

About SIGMA PVA WALLFILLER


High quality interior filler/skim coat for concrete, cement and renders


  • For Interior Use

  • Very Smooth Surface Produced

  • High Cohesive Strength