SIGMA RED OXIDE QC

Adhesion primer for steel based on modified alkyd resins and
pigmented with red oxide
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– good adhesion to properly cleaned steel
– good temporary corrosion preventing properties
– good flow properties
– lead free
– easy to apply
– quick drying
COLOUR AND GLOSS
Red-brown – flat

Product Details
SKU: 809 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.3g/cm3
Solids content
approx. 42% by volume
Recommended
dry film thickness
35 μm
Theoretical
approx. 12 m2/ltr (46 m2/usg) for 35 μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 2 hours
Overcoating interval
min. 16 hours
max. no limitation
Shelf life (cool,dry place)
24 months

– shop primed steel (intact); remove all contamination and prepare
according to ISO-St2
– weld seams, cut, burnt or corroded areas; remove weld spatters
round off sharp edges, remove all contamination and prepare
according to ISO-St3
– bare steel; partly corroded; remove all contamination by means of
blast cleaning according to ISO-Sa2½
– bare steel with little corrosion; remove all contamination and
prepare by power tool cleaning according ISO-St3
to be used as a priming coat in alkyd systems over ferrous metals
– can be overcoated with 0811 Sigmacolor Undercoat followed
by the Sigmacolor or Ecolux range of finish products.

Priming coat for use with
– Sigma range of solvent based finishes

Method Of Application

AIRLESS SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 3%
AIR SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
3 – 10%
BRUSH AND ROLLER
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 2%
CLEANING SOLVENT
20-05 (flashpoint 38 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA RED OXIDE QC”

Your email address will not be published. Required fields are marked *

About SIGMA RED OXIDE QC


Alkyd red Oxide Primer for steel


  • For interior and exterior use

  • Good temporary corrosion preventing properties

  • Quick drying