SIGMA ROAD MARKING PAINT WB

Water based road and pavement marking paint
PRINCIPAL CHARACTERISTICS
– designed for exterior use, can be used internal
– unsaponifiable
– developed to give good adhesion to concrete and asphalt
– excellent abrasion resistance
– excellent hiding power
– good reflection properties
– very quick drying
– easy to apply
– conforms to environmental specifications
COLOUR AND GLOSS
white, yellow and black – flat

Product Details
SKU: 898 Category: Tag:

Basic Data At 20 °c

Mass density: approx. 1.4g/cm3
Solids content: approx. 37% by volume
Recommended dry film thickness: 40 μm
Theoretical spreading rate: approx. 9.25 m2/ltr (35 m2/usg) for 40 μm
depending on the colour, nature and condition of the substrate and the application method employed
Touch dry after: approx. 30 minutes
Shelf life (cool, dry place): 24 months

Concrete must be dry maximum 4% moisture content and
– free from laitance dirt, grease, and other surface contamination
– asphalt must have aged and cured for a minimum of 6 months to avoid the possibility of bleeding through the applied coating

Quick drying paint to be applied in two coats for marking
lines and patterns on concrete and asphalt surfaces

Method Of Application

AIRLESS SPRAY
Recommended thinner: none
AIR SPRAY
Recommended thinner: sweet water
Volume of thinner: approx. 5 – 10%
BRUSH AND ROLLER
Recommended thinner: sweet water
Volume of thinner: approx. 5 – 10%
CLEANING SOLVENT: sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA ROAD MARKING PAINT WB”

Your email address will not be published. Required fields are marked *

About SIGMA ROAD MARKING PAINT WB


Water based road and pavement marking paint


  • Developed to give good adhesion to concrete and asphalt

  • Excellent abrasion resistance

  • Excellent hiding power