SIGMA SPRAYPLASTER

Ready mixed lime free sprayable plaster/ intermediate spatter texture
based on copolymer resins for a range of cement based substrates
PRINCIPAL CHARACTERISTICS
– interior and exterior application as an intermediate spatter coat
– quick drying
– higher filling thicknesses possible by adding cement
– applied by hopper gun
– almost odourless
– conforms to environmental specifications
COLOUR AND GLOSS
off-white – flat

Product Details
SKU: 810 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.9g/cm³
Solids content
approx. 76% ± 2% by weight
56% ± 2% by volume
Recommended dry film
200μm – 1mm
Theoretical
approx. 0.5 – 1.0 kg/ m² @ 1mm
spreading rate
approx. 0.4 – 0.8 kg/m² (when used as a spatter coat)
depending on the nature and condition of the substrate and the
application method employed
Overcoating interval
min. 12 hours
max. no limitation
Shelf life (cool,dry place)
12 months

New primed substrates
– dry and free from mortar splashes
– all surface contamination and dust must be removed
– cracks should be raked out before filling
previously painted (maintenance)
– remove all contamination, loose and flaking paint
– when used for patching work, spot prime all bare areas
– cracks should be raked out and primed before filling.

Recommended primer (skim)
– 0805 Sigma Masonry Primer
“ (texture spatter coat)
– 0852 Sigma Acrylic Primer Sealer*
*alternate primer 0804.
Recommended finish
– minimum of 2 coats smooth waterborne finish
– from the range of Sigma smooth waterborne finishes

Method Of Application

TOOLS
stainless steel filling knife, trowel or Swedish knife
Recommended thinner
not to be thinned
SPRAY EQUIPMENT
hoppergun or worm pump, e.g. Putzmeister P4 or S3
Volume of thinner
max 5% depending on the required texture
Working procedure for
skim and smooth the surface immediately after spraying with a
spray application
filling knife and allow to dry. When dry sand smooth to remove
imperfections, e.g. skim marks/stripes before applying paint
or texture system
Note: when filling at thicknesses higher than 1 mm, use
four parts 0810 Sigma Sprayplaster and one volume
part cement and one volume part Ebrodur.
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA SPRAYPLASTER”

Your email address will not be published. Required fields are marked *

About SIGMA SPRAYPLASTER


Ready mixed lime free sprayable plaster/ intermediate spatter texture.


  • Interior and exterior spatter coat

  • Quick drying

  • Applied by hopper gun