SIGMA STONE-TEX

High quality multicolor stone textured finish, based on an acrylic binder with colored quartz sands and marble grains, giving a unique rough surface
PRINCIPAL CHARACTERISTICS
– designed for exterior use, can be used internal
– unsaponifiable and alkaline resistant
– excellent colour retention properties
– excellent flexibility properties
– moisture vapour permeable
– excellent weather resistance
– good abrasion and shock resistance
– excellent water repellent characteristics
– easily washable
– almost odourless
– easy to apply by standard hopper gun
COLOUR AND GLOSS
see Sigma Stone-Tex sample card – flat

Product Details
SKU: 976 Categories: , Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.9 g/cm3
Solids content
approx. 82% by weight depending on colours
Recommended
spray until a continuous, closed film is achieved
dry film thickness
Theoretical
approx. 3 – 5 kg/m2
spreading rate
depending on the required finish, the nature and condition of the
substrate and the application method employed
Touch dry after
approx. 6 hours depending on the thickness
Overcoating interval
min. 24 hours
max. no limitation
Shelf life (cool,dry place)
12 months

New substrates
– dry and properly cleaned concrete and other cement based or
plastered surfaces
– all dirt, powder, laitance and other contamination must be removed
– prime with one coat of 0852 Sigma Acrylic primer Sealer
gypsum containing materials and substrates which are powdery
SUBSTRATE CONDITIONS
should be primed with one coat of 0804 Sigmafix Primer
(overthick application should be avoided as this may affect
the adhesion of subsequent coats)
– lime containing materials should be neutral and if they react
alkaline, flush with sweet water until neutral
previously painted substrates
– remove all blistered, cracked, brittle and poorly adhering paint, and any other contamination from the surface
– good intact wall paint layers must be cleaned with a 3% solution of ammonia in water
– glossy paint layers must be sanded
– not recommended on old alkyd types of wall paints
– for repair of substrate imperfections;
external and internal – 0896 Sigma Concrete Filler

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer

Method Of Application

– ensure hopper gun is held perpendicular to the wall to ensure
a good, even film is achieved
Overcoating (clear finish)
– in order to minimize dust pick up and staining, it can be
overcoat with 0866 Sigmadur Finish High Gloss or
0867 Sigmadur Finish Semi Gloss in a minimum of 2 coats
(clear finish). Dilution ratio of applied coats should be 10 – 20%
for first coat and 0 – 10% for 2nd coat.M137
SPRAY EQUIPMENT
hopper gun
Recommended thinner
sweet water
Volume of thinner
max. 5% (if required)
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA STONE-TEX”

Your email address will not be published. Required fields are marked *

About SIGMA STONE-TEX


High quality multicolor stone textured finish


  • Excellent colour retention properties

  • Excellent flexibility properties

  • Moisture vapour permeable