SIGMACOLOR FLAT

Quality finish coat based on alkyd resins, producing a durable flat
finish for various substrate types (SASO approved 2881-2017)
PRINCIPAL CHARACTERISTICS
– for interior use
– good colour retention properties
– good covering and high opacity
– washable with high scrub resistance
– good flow and drying properties
– lead free
– easy to apply
COLOUR AND GLOSS
see Sigma Standard Colour Selection – flat

Product Details
SKU: 816 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.4g/cm3
Solids content
approx. 54% by volume
Recommended
dry film thickness
35 μm
Theoretical
approx. 15 – 16 m2/ltr (60 m2/usg) for 35 μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 2 hours
Overcoating interval
min. 12 hours
max. no limitation
Shelf life (cool,dry place)
24 months
Flashpoint
39 °C

New primed/undercoated substrates
– dry and clean primed concrete, cement render, plaster, gypsum
and gypsum board, timber and metal.
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed.
previously painted substrates
free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– bare and repaired areas should be spot primed prior to application

Recommended primers
– from the range of Sigma primers appropriate to the substrate type
Recommended buildcoat
– 0811 Sigmacolor Undercoat
Recommended finish
– applied in two coats at 35 – 40μm dft per coat

Method Of Application

AIRLESS SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
AIR SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
5 – 10%
BRUSH AND ROLLER
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
CLEANING SOLVENT
20-05 (flashpoint 38 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACOLOR FLAT”

Your email address will not be published. Required fields are marked *

About SIGMACOLOR FLAT


High quality alkyd flat finish coat


  • For interior use

  • Good colour retention properties

  • Washable with high scrub resistance