SIGMACOLOR GLOSS

Quality finish coating based on alkyd resins, producing a durable
high gloss finish for various substrate types.
(SASO approved 2881-2017)
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– good colour retention properties
– good covering and high opacity
– particularly suitable for wood and steel
– good weather resistance
– washable with very high scrub resistance
– good flow and drying properties
– easy to clean
– easy to apply
– lead free
COLOUR AND GLOSS
see Sigma Standard Colour Selection – high gloss

Product Details
SKU: 818 Category: Tags: , ,

Basic Data At 20 °c

Mass density
approx. 1.15g/cm3
Solids content
approx. 50% by volume
Recommended
dry film thickness
35 μm
Theoretical
approx. 14 m2/ltr (57 m2/usg) for 35 μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 2 hours
Overcoating interval
min. 16 hours
max. no limitation
Shelf life (cool,dry place)
24 months
Flashpoint
39 °C

New primed/undercoated substrates
– dry and clean primed concrete, cement render, plaster, gypsum
and gypsum board, timber and metal.
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed.
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– bare and repaired areas should be spot primed prior to application

Recommended primers
– from the range of Sigma Primers appropriate to the substrate type
Recommended buildcoat
– 0811 Sigmacolor Undercoat
Recommended finish
– applied in two coats at 35 – 40μm dft per coat

Method Of Application

AIRLESS SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
AIR SPRAY
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
5 – 10%
BRUSH AND ROLLER
Recommended thinner
20-05 (flashpoint 38 °C)
Volume of thinner
0 – 5%
CLEANING SOLVENT
20-05 (flashpoint 38 °C)

Reviews

There are no reviews yet.

Be the first to review “SIGMACOLOR GLOSS”

Your email address will not be published. Required fields are marked *

About SIGMACOLOR GLOSS


High quality alkyd gloss finish coat


  • For interior and exterior use

  • Good colour retention properties

  • Washable with high scrub resistance