SIGMACRYL FLAT A.F.

Quality decorative anti fungicidal wall paint based on an acrylic
copolymer resins.
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– inhibits the growth of fungi and mould “certified”
– unsaponifiable
– good colour retention properties
– water vapour permeable
– good hiding opacity
– good adhesion properties
– good flow and leveling properties
– good wash and scrub properties
– anti carbonation properties
– almost odourless
– easy to apply
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigma Standard Colour Selection – flat

Product Details
SKU: 638 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.4g/cm3
Solids content
approx. 34% ± 2% by volume depending on colours
Theoretical
approx. 13.6 m2/ltr @ 25μm /11.33 m2/ltr @ 30μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 30 minutes
Overcoating interval
min. 2 hours
max. no limitation
Shelf life (cool dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum
and gypsum board
– abrading is recommended before and between applications.
dirt, dust and other surface contamination must be removed prior to
application of finishing coats.
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal) *
– 0896 Sigma Concrete Filler (external)
*alternate primer 0805, alternate filler 0864
Recommended finish
– applied in two coats at 30μm dft per coat

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 10%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 5 – 10%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACRYL FLAT A.F.”

Your email address will not be published. Required fields are marked *

About SIGMACRYL FLAT A.F.


High quality decorative anti fungicidal wall paint


  • Inhibits the growth of fungi and mould “certified”

  • Promotes hygiene through good washability

  • Good weather resistant with Matt finish