SIGMACRYL HIGH GLOSS

High quality decorative and protective waterborne paint based on acrylic copolymer resins providing a high gloss finish
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– unsaponifiable
– good colour retention properties
– moisture vapour permeable
– good weather resistant properties
– anti-carbonation properties
– good flow and leveling properties
– good wash and scrub resistance
– excellent heat reflection with ULTRA- COOL colors
– almost odourless
– easy to apply
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigma Standard Colour Selection – gloss

Product Details
SKU: 846 Category: Tags: , ,

Basic Data At 20 °c

Mass density
approx. 1.2g/cm³
Solids content
approx. 37% ± 2% by volume depending on colour
Recommended dry film
25 – 30μm
Theoretical
approx. 14.8 m²/ltr @ 25μm
approx. 12.3 m²/ltr @ 30μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 1 hour
Overcoating interval
min. 4 hours
max. no limitation
Shelf life (cool dry place)
12 months

new primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum and gypsum board
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed prior to application of finishing coats.
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal) *
– 0896 Sigma Concrete Filler (external)
*alternate primer 0805, alternate filler 0864
Recommended finish
– applied in two coats @ 25-30μm dft per coat
– optimum hiding is obtained by first applying 0842 Sigmacryl Flat
over the primer

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACRYL HIGH GLOSS”

Your email address will not be published. Required fields are marked *

About SIGMACRYL HIGH GLOSS


Quality water based decorative and protective gloss finish


  • For interior and exterior use

  • Good wash and scrub resistance

  • Good weather resistance