SIGMACRYL PREMIUM A.B.F. FLAT

Premium quality anti bacterial and anti fungal decorative finish
paint, based on an environmentally friendly medium incorporating
proven silver ion technology and providing lifelong surface
protection from harmful microorganisms.
PRINCIPAL CHARACTERISTICS
– ideal for hospitals, local authority buildings, hotels, restaurants,
schools, residential villas and homes.
– eliminates harmful microorganisms
– effective for the full film life
– high scrub resistance
– excellent adhesive properties
– no objectionable odour
– low flame spread properties
– conforms to environmental specifications
COLOUR AND GLOSS
Sigma Standard Colour Selection – Flat

Product Details
SKU: 731 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.4 g/cm3
Solids content
approx. 34% ± 2% by volume
Recommended dry film
25 – 30μm
Theoretical
approx. 13.6 m²/ltr @ 25μm / 11.33 m²/ltr @ 30μm
spreading rate
depending on the condition and nature of the substrate and
application method
Touch dry after
approx. 1 hour
Overcoating interval
min. 4 hours
max. no limitation
Shelf life
12 months

New primed substrates
– dry and clean primed concrete, cement, plaster, gypsum board.
– all dirt, grease and other contamination must be removed
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– glossy paint layers must be abraded flat
– not recommended over existing solvent borne paint types.
– for further advice on compatibility, contact Sigma Paints DTS

Recommended filler
– 0803 Sigma PVA Wallfiller *
Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
*alternate primer 0805, alternate filler 0864
Recommended finish
– 0731 applied in two coats @ 30μm per coat
Application Conditions
– Applied in an air conditioned environment below 35ºC

Method Of Application

AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%
AIR SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 5 – 10%
BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACRYL PREMIUM A.B.F. FLAT”

Your email address will not be published. Required fields are marked *

About SIGMACRYL PREMIUM A.B.F. FLAT


Premium quality anti bacterial and anti fungal decorative finish


  • Ideal for hospitals, local authority buildings, hotels, restaurants schools, residential villas and homes.

  • Eliminates harmful microorganisms

  • High scrub resistance