SIGMACRYL PURE SILK ABF

High quality water based decorative and protective finish based on
100% pure acrylic silicone resins with special anti-fungi and
anti-bacterial additive providing a highly durable finish
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– excellent wash and scrub resistance
– excellent adhesion properties
– unsaponifiable
– inhibits the growth of fungi and mould
– eliminates harmful microorganisms
– anti-carbonation properties
– very good colour retention properties
– moisture vapour permeable
– weather resistance
– very good crack bridging
– good flow and leveling properties
– low flame spread properties
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigma Standard Colour Selection – silk

Product Details
SKU: 751 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.3g/cm3
Solids content
approx. 39% ± 2% by volume depending on colours
Recommended dry film
25 – 30μm
Theoretical
approx. 15.6 m2/ltr @ 25μm / 13 m2/ltr @ 30μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 1 hour
Overcoating interval
min. 4 hours
max. no limitation

New primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum and gypsum board
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed prior to application of finishing coats
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal) *
– 0896 Sigma Concrete Filler (external)
*alternate primer 0805, alternate filler 0864
Recommended finish
– applied in two coats @ 30μm dft per coat

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACRYL PURE SILK ABF”

Your email address will not be published. Required fields are marked *

About SIGMACRYL PURE SILK ABF


High quality water based decorative and protective finish based on
100% pure acrylic


  • Inhibits the growth of fungi and mould

  • Eliminates harmful microorganisms

  • Excellent wash and scrub resistance