SIGMACRYL SILK

High quality decorative and protective emulsion type paint based on acrylic copolymer resins. (Conforms to SASO 470- 2016 for interior/exterior emulsion paint).
PRINCIPAL CHARACTERISTICS
– for interior and exterior
– unsaponifiable
– good colour retention
– moisture vapour permeable
– good weather resistance
– anti-carbonation properties
– good flow and levelling
– good wash and scrub resistance
– low flame spread class 1, certified
– almost odourless
– easy to apply
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigma Standard Colour Selection and NCS – Silk / Eggshell

Product Details
SKU: 839 Category: Tags: , ,

Basic Data At 20 °c

Mass density
approx. 1.26 g/cm3
Solids content
approx. 36% ± 2% by volume depending on colours
Recommended dry film
25 – 30μm
Theoretical
approx. 14.4 m²/ltr at 25μm / 12 m²/ltr at 30μm
spreading rate
depending on the condition and nature of the substrate and
application method
Touch dry after
approx. 1 hour
Overcoating interval
min. 4 hours
max. no limitation
Shelf life (cool, dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum and gypsum board
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed prior to application of finishing coats.
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer *
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal) *
– 0896 Sigma Concrete Filler (external)
*alternate primer 0805, alternate filler 0864
Recommended finish
– applied in two coats at 30μm dft per coat

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 5%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMACRYL SILK”

Your email address will not be published. Required fields are marked *

About SIGMACRYL SILK


High quality decorative and protective silk topcoat


  • For interior and exterior

  • Good weather resistance

  • Good wash and scrub resistance