SIGMATEX

Premium quality protective and decorative waterborne paint based on high quality acrylic copolymer resins (exceeds SASO 470-2016 for exterior emulsion paint)
PRINCIPAL CHARACTERISTICS
– for interior and exterior protection
– unsaponifiable
– excellent colour retention properties
– anti-carbonation properties
– moisture vapour permeable
– very good opacity
– excellent adhesive properties
– excellent weather resistant properties
– superior wash and scrub properties
– low flame spread, certified
– almost odourless
– easy to apply
COLOUR AND GLOSS
see Sigma Standard Colour Selection – flat

Product Details
SKU: 843 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.35g/cm³
Solids content
approx. 37% ± 2% by volume depending on colours
Recommended dry film
25 – 30μm
Theoretical
approx.14.8m²/ltr @ 25μm / 12.33m²/ltr @ 30μm
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 30 minutes
Overcoating interval
min. 2 hours
max. no limitation
Shelf life (cool dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render, plaster, gypsum and gypsum board
– abrading is recommended before and between applications.
– dirt, dust and other surface contamination must be removed prior to application of finishing coats.
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.
– bare and repaired areas should be spot primed prior to application

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller (internal)
– 0896 Sigma Concrete Filler (external)
Recommended finish
– applied in two coats @ 30μm dft per coat

Method Of Application

BRUSH AND ROLLER
Recommended thinner
sweet water
Volume of thinner
approx. 0 – 10%
AIRLESS SPRAY
Recommended thinner
sweet water
Volume of thinner
approx. 5 – 10%

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMATEX”

Your email address will not be published. Required fields are marked *

About SIGMATEX


Premium quality protective and decorative waterborne flat topcoat


  • Excellent colour retention properties

  • Superior wash and scrub properties

  • For interior and exterior protection