unique highly decorative metallic pearl finish applied over emulsion
type paints, based on high quality waterborne synthetic resins with
pearlescent pigments.
– for interior use only
– luxurious pearlescent finish
– unique and individual
– light abrasion resistance
– extensive range of colour combinations
– tolerant to washing
– easy to apply
– quick drying
– non toxic
– low odour
– conforms to environmental specifications
selected colour range – pearlescent gloss

Product Details
SKU: 941 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.04 g/cm3
Solids content
approx. 20% by volume
approx. 20 m2 per litre
spreading rate
depending on the weight of application
Touch dry after
approx. 30 minutes
Overcoating interval
min. 2 hours
Shelf life (cool,dry place)
12 months

Dry clean, primed, filled and finish painted concrete, cement render,
plaster, gypsum and gypsum board.
(for other substrate types please contact Sigma DTS)
substrate should be flat, level and smooth

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0805 Sigma Masonry Primer
– 0804 Sigmafix Primer for gypsum board
Recommended fillers
– 0803 Sigma PVA Wallfiller
– 0864 Aquafill Wallfiller Fine
Recommended basecoat
– 0839 Sigmacryl Silk (2 coats)

Method Of Application

1-Prime, fill and apply two coats of 0839 Sigmacryl Silk.
2-Allow Sigmacryl Silk to fully dry and harden.
a) Decant Sigmulto Lumiere into a shallow tray
b) Dip Lumiere application tool into the product
c) Remove excess material by press onto scrap cardboard.
d) Press onto wall surface randomly using even pressure.
e) Repeat steps b, c and d until required design is achieved


Complies with VOC specifications such as LEED etc.


There are no reviews yet.

Be the first to review “SIGMULTO LUMIÈRE”

Your email address will not be published. Required fields are marked *


Unique highly decorative metallic pearl finish

  • Luxurious pearlescent finish

  • Unique and individual

  • Light abrasion resistance