SIGMULTO PHAROS

Decorative natural polished marble type effect based on high quality
synthetic resins, applied and finished using towel or scraper
PRINCIPAL CHARACTERISTICS
– for interior use only
– unsaponifiable and alkaline resistant
– low odour
– abrasion resistant
– wide variety of designs and effects possible
– easy to apply
– conforms to environmental specifications
COLOUR AND GLOSS
see Sigmulto Pharos shade card – satin

Product Details
SKU: 885 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.6kg/cm3
Solids content
approx. 42% by volume
Theoretical
approx. 0.6 – 1.0 kg/m2
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 1 hour
Overcoating interval
min. 6 hours
max. no limitation
Shelf life (cool,dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render and plaster
– dirt, dust and other contamination must be removed
previously painted substrates
– free from defective or poorly adhering paint films
– wash intact or remaining paint films with a 3% ammonia solution
– not recommended over glossy or solvent borne paint types.

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0803 Sigma PVA Wallfiller
Recommended finish
– applied in two or three application stages
Decorative option
– applied as a base for 0905 Sigmulto Amouage

Method Of Application

New surface primed and filled.
Previous painted surface thoroughly prepared, filled and primed.
a) apply the first skim-coat of Pharos in the chosen colour using a
stainless steel trowel and adopting a random semi circular application
motion and allow to dry thoroughly.
b) abrade the surface lightly with a very fine grade abrasive paper
c) using a stainless steel flexible Spatula, apply Pharos using the same
method of application, spreading randomly and evenly removing and
Scraping off all excess material with each movement.
d) when the application process has been completed, lightly abrade
flour grade abrasive paper and follow by passing over the surface
with a clean spatula to give the final polished effect
Note
in areas where pedestrian traffic is heavy and in areas where exposure
to moisture is likely, Sigmulto Pharos Wax should be applied
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMULTO PHAROS”

Your email address will not be published. Required fields are marked *

About SIGMULTO PHAROS


Decorative natural polished marble type effect


  • Low odour

  • Abrasion resistant

  • Wide variety of designs and effects possible