SIGMA TEXTURED EP

Two component structured finish based on an epoxy resin. Developed
as a strong , durable and abrasion resistant fine spatter texture
PRINCIPAL CHARACTERISTICS
– for interior and exterior use
– unsaponifiable and alkaline resistant
– excellent resistance to atmospheric exposure
– resistant to water and to splash and spillage of mild chemicals
and solvents
– low profile fine spatter coat
– tough and abrasion resistant
– easy to clean
COLOUR AND GLOSS
white – flat

Product Details
SKU: 895 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.54g/cm3
Solids content
approx. 79% by weight
Recommended
dry film thickness
as required to obtain the necessary structure
Theoretical
approx. 2.0 – 3.5 m²/ltr
spreading rate
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 2 hours
Overcoating interval
min. 16 hours
max. 10 days
Shelf life (cool, dry place)
12 months

All substrates must be primed with 7406 Sigmacover 211
– concrete, dry and properly cleaned with moisture content below 4%
– steel, blast cleaned to ISO Sa 2½
– galvanised steel, free from grease, salts and other contamination,
preferably blast cleaned to (Rz) 30 μm
– texture should be applied within specified overcoating time of primer
– the minimum allowable substrate temperature is 5° C.
– the maximum allowable R.H. during application and curing is 85° C

– epoxy based, high quality, high strength textured coating to be applied on well prepared cement based building materials.
– substrate must be primed with 7406 Sigmacover 211
– to be overcoated with polyurethane to ensure non-chalking,
maximum performance, durability and lifetime
INSTRUCTIONS FOR USE
– mixing ratio: by volume; base to hardener 95 : 5
the temperature of the mixed base and hardener should be above
15°C, otherwise extra solvent may be required to obtain the right
application viscosity
Potlife at 20°C
4 hours

Method Of Application

AIR SPRAY
Recommended thinner
use hoppergun or worm pump, e.g. Putzmeister P4 or S3
Volume of thinner
none
CLEANING SOLVENT
90-53 (flashpoint 26 °C)

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMA TEXTURED EP”

Your email address will not be published. Required fields are marked *

About SIGMA TEXTURED EP


Two component structured finish based on an epoxy


  • Excellent resistance to atmospheric exposure

  • Resistant to water and to splash and spillage of mild chemicals
    and solvents

  • Low profile fine spatter coat