SIGMAPUTZ 2 MM

High quality spray or trowel applied textured finish based on a
copolymer dispersion filled with ground natural stone
PRINCIPAL CHARACTERISTICS
– designed for exterior use, can be used internal
– unsaponifiable
– good colour retention properties
– water vapour permeable
– good weather resistance
– good adhesion properties
– almost odourless
– easy to apply
COLOUR AND GLOSS
see Sigma Textured Paints Sample Card and Sigma Standard
Colour Selection – flat

Product Details
SKU: 834 Category: Tags: ,

Basic Data At 20 °c

Mass density
approx. 1.8g/cm3
Solids content
approx. 78% by weight depending on colours
Theoretical
approx. 1.0 – 2.0 kg/m2 for spray application
spreading rate
approx. 3.0 – 5.0 kg/m2 for trowel application
depending on the nature and condition of the substrate and the
application method employed
Touch dry after
approx. 3 hours depending on the thickness
Overcoating interval
min. 24 hours
max. no limitation
Shelf life (cool,dry place)
12 months

New primed substrates
– dry and clean primed concrete, cement render and plaster
– all dirt and other surface contamination must be removed
– a further application of 0842 will enhance the protective properties due to the granular structure formed by trowel application.
previously painted
– remove all contamination, loose and flaking paint from the surface
– spot prime all bare areas
– intact paint layers must be cleaned with a 3% ammonia solution
– cracks must be raked out and primed before filling.
– not recommended over old alkyd types of wall paints.

Recommended primers
– 0852 Sigma Acrylic Primer Sealer
– 0804 Sigmafix Primer
Recommended fillers
– 0896 Sigma Concrete Filler (external)
– 0803 Sigma PVA Wallfiller (internal)
Recommended finish spray
– 0842 Sigmacryl Flat applied over primer/filler prior to the final
application of the texture
Recommended finish trowel
– full homogeneous coat applied over primer

Method Of Application

SPRAY EQUIPMENT
hopper gun or worm pump, e.g. Putzmeister P4 or S3
Recommended thinner
sweet water
Volume of thinner
max. 5%
Trowel
Stainless Steel Trowel
Recommended thinner
sweet water
Volume of thinner
0 – 5%max
CLEANING SOLVENT
sweet water

Environmental

Complies with VOC specifications such as LEED etc.

Reviews

There are no reviews yet.

Be the first to review “SIGMAPUTZ 2 MM”

Your email address will not be published. Required fields are marked *

About SIGMAPUTZ 2 MM


High quality spray or trowel applied textured finish


  • Good colour retention properties

  • Good weather resistance

  • Good adhesion properties